| OSBORN LOAD RUNNERS PLR-2-3 Cam Follower and Track Roller - Stud Type | B:3.7500 in; series:205; expansion type:Non-Expansion Bearin; housing material:Polymer; standards met:UL, AFBMA, AGMA, ASM; length through bore:1.6 in; manufacturer catalog number:127594; radial static load capacity:1769 lb; seal type:Triple Lip with Flin; lubrication type:Lubrication Fitting; |
| OSBORN LOAD RUNNERS FLRS-1-1/4 Cam Follower and Track Roller - Stud Type | D:4.3750 in; replacement bearing:RCI-50MM; seal type:Felt; radial dynamic load capacity:8070 lb; locking device:Double Concentric Co; overall height:5-5/8 in; housing construction:Solid Flange Mount; finish/coating:Uncoated; expansion type:Non-Expansion Bearin; overall depth:3-5/8 in; |
| OSBORN LOAD RUNNERS HPC-125 Cam Follower and Track Roller - Stud Type | Housing:SAFS 048 KA; Da:359.999 mm; h:56.356 mm; H1:209.55 mm; L:749.3 mm; P180°:222 kN; Cap bolt, SAE grade:8; da:214.313 mm; Mass pillow block:245 kg; J min.:571.5 mm; |
| OSBORN LOAD RUNNERS NCF-1-1/8-SB Cam Follower and Track Roller - Stud Type | P60°:557 kN; Eye bolt:2 x 1/2-13 UNC; Ca:107.798 mm; P150°:185 kN; P180°:222 kN; Initial grease fill:2154.6 g; Housing:SAFS 540; R1:122.237 mm; Appropriate attachment bolt size G:1.25 in; R2:42.862 mm; |
| OSBORN LOAD RUNNERS HPC-62 Cam Follower and Track Roller - Stud Type | cup width:1.5000 in; cone width:3.5625 in; manufacturer upc number:053893362755; bearing material:Steel; abma precision rating:Class 2; double inner ring width:3.563 in; assembly type:Double Row; d:7.0000 in; D:9.7500 in; |
| OSBORN LOAD RUNNERS FLRC-3 Cam Follower and Track Roller - Stud Type | bearing type:Spherical Roller; B:3.5800 in; mounting:Two-Bolt Base; end type:Open; housing construction:Solid Pillow Block; d:2.4375 in; overall height:5.8000 in; housing material:Cast Steel; radial dynamic load capacity:46400 lbs; locking device:Eccentric Collar; |
| OSBORN LOAD RUNNERS VLR-8-1/2 Cam Follower and Track Roller - Stud Type | D:130 mm; flange mounting type:Two-Bolt Flange; overall depth:45.5 mm; housing construction:Solid Housing; compatible bore diameter:1-1/4 in, 1-3&#; B:95.3 mm; finish/coating:Uncoated; series:207; compatible bearing type:Ball Bearing; standards met:UL, AFBMA, AGMA, ASM; |
| OSBORN LOAD RUNNERS VLR-2 Cam Follower and Track Roller - Stud Type | harmonization code:3926904590.US; misalignment tolerance:0.020 in; maximum shaft surface speed:4500 fpm; shaft diameter:3.5429 in; typical application:Exceptional Bearing; D:4.3310 in; Weight:0.31 lb; lip material:Labyrinth; continuous temperature range:-22 to 400°F; construction description:ISO-GARD® Flange; |
| OSBORN LOAD RUNNERS VLRY-5-1/2 Cam Follower and Track Roller - Yoke Type | seal material:Aluminum; compatible bearing type:Spherical Roller; seal type:Labyrinth; compatible bore diameter:4-1/8 in; backing material:Steel; |
| OSBORN LOAD RUNNERS FLRSE-1 Cam Follower and Track Roller - Stud Type | grade:W1; diameter:1-1/8 in; material:Steel; finish:Polished; length:3 ft; industry standards met:SAE J-437, ASTM A-68; meets industry standards by:ASTM, SAE; |
| OSBORN LOAD RUNNERS PLRH-1-1/4 Cam Follower and Track Roller - Stud Type | grade:Commercial; race material:Brass; housing material:Carbon Steel; ball material:Case Hardened Carbon; d:0.3125 in; rod end type:Male Threaded; lubrication type:Zerk Fitting; thread direction:Left Hand; |
| OSBORN LOAD RUNNERS VLRE-2 Cam Follower and Track Roller - Stud Type | Static Load Rating (kN):53.9; Weight:0.02 KGS; D:62mm; B:18.161mm; Availability:In Stock; d:31.75mm; SKU:set-43-timken; Dynamic Load Rating (kN):59.9; |
| OSBORN LOAD RUNNERS NCFY-4-S Cam Follower and Track Roller - Yoke Type | rod end type:Male Threaded; lubrication type:Non-Lubricated; housing material:Carbon Steel; ball material:Carbon Steel /; thread direction:Right Hand; d:0.7500 in; grade:Commercial Extra Cap; |
| OSBORN LOAD RUNNERS HPJA-90 Cam Follower and Track Roller - Yoke Type | SKU:f625-2rs-zen; Weight:0.20 KGS; d:5mm; D:16mm; Seals or Shields:Two Rubber Seals; Clearance:Standard; Availability:In Stock; Cage Type:Steel; B:5mm; |