121.45.5000.990.41.1502 Standard 5 Slewing Ring Bearings

No.	Brand	b	c	E	a	C	B	T	d
3 036	Rollix	-	-	-	44.7 mm	-	49 mm	-	105 mm
92.40.2199.990.11.1502	Standard 5	-	-	-	-	-	-	-	300 mm
191.50.6735.990.41.1502	Standard 5	-	-	-	-	-	52 mm	-	170 mm
12.50.3839.001.49.1502	Standard 5	-	-	-	-	-	38 mm	-	110 mm
192.25.2500.990.41.1502	Standard 5	-	-	-	-	-	12 mm	-	20 mm
162.36.1900.891.41.1503	Standard 5	-	-	-	-	-	10 mm	-	80 mm
91.35.2012.991.41.1502	Standard 5	-	-	-	-	-	48 mm	-	160 mm
26 0641 01	Rollix	-	-	-	-	-	160 mm	-	-
191.25.2000.990.41.1502	Standard 5	-	-	-	-	-	14 mm	-	22 mm
11.50.3747.001.49.1502	Standard 5	-	-	-	-	-	20.6 mm	-	25 mm
22 0541 01	Rollix	-	-	-	-	-	20 mm	-	30 mm
192.32.4000.990.41.1502	Standard 5	7 mm	-	77.5 mm	-	-	23 mm	-	-
192.32.2500.990.41.1502	Standard 5	-	-	-	-	-	-	-	15 mm
191.40.4000.990.41.1502	Standard 5	-	-	-	-	-	-	-	670 mm
121.36.4250.990.41.1502	Standard 5	-	-	-	-	-	43 mm	-	55 mm
11.40.3150.001.41.1502	Standard 5	-	-	-	-	-	93 mm	-	130 mm
121.36.4500.990.41.1502	Standard 5	-	-	-	30.8 mm	-	37 mm	-	75 mm
191.32.2500.990.41.1502	Standard 5	-	-	-	-	-	64 mm	-	130 mm
161.36.2000.891.41.1503	Standard 5	-	-	-	-	-	-	-	-
92.50.2266.990.41.1502	Standard 5	-	-	-	-	-	-	-	600 mm
61.40.1800.013.19.1503	Standard 5	-	-	-	-	-	18 mm	-	20 mm
38 0411 01	Rollix	-	-	-	-	-	65 mm	-	150 mm
21 0641 01	Rollix	-	-	-	-	-	18 mm	-	-
11.25.1800.001.41.1503	Standard 5	-	-	-	-	-	46 mm	-	-
192.40.4000.990.41.1502	Standard 5	-	-	-	-	-	17 mm	-	35 mm
35 0541 01	Rollix	-	-	-	-	-	174 mm	-	260 mm
121.32.4250.990.41.1502	Standard 5	-	-	-	-	-	80 mm	-	200 mm
12.30.2538.000.11.1503	Standard 5	-	-	-	-	-	224 mm	-	-
24 0641 01	Rollix	-	-	-	-	-	40 mm	-	50 mm
92.40.2395.991.41.1502	Standard 5	-	-	-	-	-	-	-	50 mm

161.45.2510.891.41.1503 Standard 5 Slewing Ring Bearings	Factor fo:13.1; Static Load Rating:32,000 N; da (min):54 mm; d:45 mm; D:100 mm; ra (max):1.5 mm; Weight:0.833 kg; Limiting Speed - Grease:7,000 rpm; Groove Diameter:96.8 mm; Dx (min):108 mm; Cy (max):5.4 mm; r1:0.5 mm; Bore Type:Cylindrical Bore; Fillet Radius/Chamfer:1.5 mm; Groove Width:2.7 mm; B:25 mm; a (max):3.3 mm; Configuration:Single Row; Radial Clearance:0.018 to 0.036 mm; Da (max):91 mm;
11.30.2235.001.41.1503 Standard 5 Slewing Ring Bearings	Axial Load Factor Y0:0.87; Cone ra (max):1 mm; D:68 mm; Limiting Speed - Oil:7,400 rpm; C:14.5 mm; Static Load Rating:71,400 N; Cup ra (max):1 mm; Weight:0.282 kg; Axial Load Factor Y1:1.58; da (min):45.5 mm; B:19 mm; Db (min):65 mm; Enclosure:Open; Configuration:Single Row; d:40 mm; Da (min):60 mm; Bore Type:Cylindrical Bore; Load Center:3.9 mm; Limiting Speed - Grease:5,600 rpm;
162.50.3000.891.41.1503 Standard 5 Slewing Ring Bearings	Snap Ring Width:1.1 mm; D1 (max):92.9 mm; Dynamic Load Rating:12,500 N; Limiting Speed - Oil:7,600 rpm; ra (max):0.6 mm; b (min):1.3 mm; r1:0.5 mm; a (max):1.7 mm; d:75 mm; Factor fo:16.0; Radial Clearance:0.025 to 0.051 mm; Limiting Speed - Grease:6,500 rpm; D:95 mm; Dx (min):101 mm; Weight:0.150 kg; Snap Ring Outside Diameter:99.4 mm; Configuration:Single Row; da (min):79 mm; B:10 mm; Da (max):91 mm;
161.45.2240.890.11.1503 Standard 5 Slewing Ring Bearings	Limiting Speed - Grease:5,700 rpm; Radial Clearance:0.030 to 0.058 mm; Da (max):105 mm; da (min):90 mm; Dynamic Load Rating:18,700 N; ra (max):1 mm; Enclosure:Double Shield; d:85 mm; D:110 mm; Bore Type:Cylindrical Bore; Static Load Rating:19,000 N; Weight:0.265 kg; Factor fo:16.2; Configuration:Single Row; Fillet Radius/Chamfer:1 mm; B:13 mm;
91.40.2003.990.11.1502 Standard 5 Slewing Ring Bearings	Configuration:Double Row; Groove Width A:26 mm; D:400 mm; Weight:81.800 kg; Axial Load Factor Y1:1.89; Static Load Rating:2,670,000 N; Center Guidance:Fixed Inner Ring Rib; Retainer Material:Machined Brass; Limiting Speed - Grease:1,200 rpm; Enclosure:Open; Limiting Speed - Oil:1,600 rpm; da (min):212 mm; Da (max):378 mm; Axial Load Factor Y2:2.81; ra (max):4 mm; d:190 mm; Dynamic Load Rating:2,600,000 N;
12.45.2940.001.49.1502 Standard 5 Slewing Ring Bearings	Snap Ring Width:2.5 mm; Configuration:Double Row; Enclosure:Snap Ring Groove wit; Weight:0.670 kg; Dx:98 mm; ra:1 mm; D:90 mm; Bore Type:Cylindrical Bore; B:30.2 mm; d:50 mm; Limiting Speed - Oil:6,000 rpm; Dynamic Load Rating:51,000 N; a (max):3.3 mm; Limiting Speed - Grease:4,500 rpm; Fillet Radius/Chamfer:1.1 mm; da:57 mm; Cy:5.4 mm; Da:83 mm; Snap Ring Outside Diameter:96.5 mm; Static Load Rating:42,000 N;
38 0541 01 Rollix Slewing Ring Bearings	a (max):3.3 mm; Fillet Radius/Chamfer:1.1 mm; Limiting Speed - Oil:9,300 rpm; Cy (max):4.6 mm; Enclosure:Single Shield with S; Dx (min):93 mm; da (min):52 mm; Bore Type:Cylindrical Bore; B:19 mm; Static Load Rating:20,500 N; D1 (max):81.8 mm; Radial Clearance:0.018 to 0.036 mm; Factor fo:14.1; D:85 mm; Da (max):78 mm; Configuration:Single Row; Snap Ring Width:1.7 mm; Weight:0.407 kg; Dynamic Load Rating:32,500 N;
7 0489 11 Rollix Slewing Ring Bearings	Fillet Radius/Chamfer:1.1 mm; Da (max):49 mm; d:22 mm; Configuration:Single Row; Static Load Rating:9,250 N; Enclosure:Double Seal; Limiting Speed - Grease:9,500 rpm; Dynamic Load Rating:18,400 N; ra (max):1 mm; D:56 mm; Weight:0.176 kg; Factor fo:12.4; da (min):29 mm; Radial Clearance:0.005 to 0.020 mm; B:16 mm; Bore Type:Cylindrical Bore;
3 0525 01 Rollix Slewing Ring Bearings	a (max):3.7 mm; Radial Clearance:0.015 to 0.041 mm; Weight:1.150 kg; Snap Ring Outside Diameter:171.5 mm; b (min):1.9 mm; Limiting Speed - Oil:4,600 rpm; Limiting Speed - Grease:3,800 rpm; Cy (max):5.1 mm; Fillet Radius/Chamfer:1.1 mm; D1 (max):161.8 mm; Enclosure:Single Shield with S; Static Load Rating:54,000 N; Bore Type:Cylindrical Bore; Dx (min):173 mm; ra (max):1 mm; D:165 mm; Configuration:Single Row;
11.40.2240.001.41.1502 Standard 5 Slewing Ring Bearings	Limiting Speed - Grease:13,000 rpm; b (min):1.4 mm; Snap Ring Width:1.1 mm; r1:0.5 mm; Snap Ring Outside Diameter:57.9 mm; Weight:0.128 kg; ra (max):1 mm; Enclosure:Single Shield with S; Da (max):46 mm; B:15 mm; da (min):31 mm; Dx (min):58.5 mm; D1 (max):49.7 mm; Static Load Rating:7,900 N; a (max):2.5 mm; Cy (max):3.3 mm; d:25 mm; D:52 mm; Fillet Radius/Chamfer:1 mm; Configuration:Single Row;
6 04 Rollix Slewing Ring Bearings	db (min):72 mm; Limiting Speed - Grease:4,300 rpm; Radial Clearance:0.040 to 0.070 mm; db (max):82 mm; dc (min):85 mm; Da (max):118 mm; Limiting Speed - Oil:5,300 rpm; D:150 mm; Configuration:Single Row; ra (max):2 mm; Static Load Rating:168,000 N; Enclosure:Open; Bore Type:Cylindrical Bore; Inside Ring Outside Diameter:83 mm; ra1 (max):2 mm; r1:2.1 mm; d:60 mm; B:35 mm; Fillet Radius/Chamfer:2.1 mm;
27 0541 01 Rollix Slewing Ring Bearings	dd (min):307 mm; db (max):279 mm; dc (min):287 mm; Configuration:Single Row; D:460 mm; B:88 mm; r1:5 mm; d:220 mm; Dynamic Load Rating:1,200,000 N; ra (max):4 mm; Limiting Speed - Oil:1,500 rpm; Limiting Speed - Grease:1,200 rpm; ra1 (max):4 mm; Radial Clearance:0.105 to 0.165 mm; Bore Type:Cylindrical Bore; Inside Ring Outside Diameter:284 mm; Fillet Radius/Chamfer:5 mm; db (min):242 mm; Da (max):438 mm;
6 0508 Rollix Slewing Ring Bearings	ra:1 mm; Bore Type:Cylindrical Bore; Fillet Radius/Chamfer:1.1 mm; Configuration:Double Row; Radial Clearance:0.013 to 0.028 mm; B:22.2 mm; Dx:58.5 mm; Enclosure:Open; D:52 mm; Limiting Speed - Oil:11,000 rpm; Groove Diameter:49.7 mm; d:20 mm; Weight:0.230 kg; Groove Width:1.4 mm; Dynamic Load Rating:21,700 N; Da:45 mm; a (max):2.5 mm; Static Load Rating:13,300 N; Limiting Speed - Grease:9,000 rpm;
11.50.3567.001.49.1502 Standard 5 Slewing Ring Bearings	d2:50 mm; D:90 mm; F:60 mm; d2 (max):mm; rs (min):1.1 mm; r1s (min):1.1 mm; Dynamic (Ca):84.1 kN; B:23 mm; s:1.6 mm; E:mm; Pu:11.090 kN; Static (Coa):90.9 kN; b1:mm; b:mm;
121.45.5300.990.41.1502 Standard 5 Slewing Ring Bearings	ra:1 mm; Enclosure:Double Shield; Static Load Rating:39,000 N; Da:83 mm; da:57 mm; Fillet Radius/Chamfer:1.1 mm; Radial Clearance:0.018 to 0.036 mm; Dynamic Load Rating:45,000 N; Limiting Speed - Oil:5,000 rpm; Weight:0.670 kg; B:30.2 mm; Bore Type:Cylindrical Bore; d:50 mm; Configuration:Double Row; D:90 mm;
191.20.2000.990.41.1502 Standard 5 Slewing Ring Bearings	d2:30 mm; Pu:10.460 kN; C:23 mm; B:27 mm; Static (Coa):85.8 kN; T:28.75 mm; Dynamic (Ca):76.4 kN; rs (min):1.5 mm; a:20 mm; r2s (min):0.6 mm; r1s (min):1.5 mm; D:72 mm;

121.45.5000.990.41.1502 Standard 5 Slewing Ring Bearings Video

Thyssenkrupp Rothe Rrde Slewing Bearing of page 6

121.45.5000.990.41.1502 Four-point contact ball slewing rings: Brand Name : Bower: Model Number : 48286. 121.40.4750.990.41.1502 Four-point contact ball

Product Categories - HongKong EVEN Slewing Bearing Co,.Ltd

121.45.5000.990.41.1502 Rothe erde slewing ring: Place of Origin : JAPAN SWEDEN U.S.A GERMANY: Brand Name : Parker. 121.45.6000.990.41.1502

Buy 121.45.5000.990.41.1502 thyssenkrupp rothe erde

Buy 121.45.5000.990.41.1502 thyssenkrupp rothe erde slewing bearing from CRANE SLEW RING PUBLIC BONDS & PROJECTS，Cross Roller Slew Bearing

Rothe erde slewing bearing standard RD700

121.45.5000.990.41.1502, 5000, 5201, 5297,6, 4747, 203. 121.45.5300.990.41.1502, 5300, 5602, 5605,6, 5047, 203. 121.45.5600.990.41.1502, 5600, 5764

Rothe Erde Slewing Bearing Luoyang JCB Bearing Import

121.45.5000.990.41.1502 121.45.5300.990.41.1502 121.45.5600.990.41.1502 121.45.6000.990.41.1502 121.50.5600.990.41.1502 121.50.6000.990.41.1502

Rothe Erde slewing bearing Luoyang JCB Bearing

121.45.5000.990.41.1502. 5201. 5297,6. 4747. 203. 121.45.5300.990.41.1502. 5602. 5605,6. 5047. 203. 121.45.5600.990.41.1502. 5764. 5891,6. 5347. 203

China Ball and Roller Combined Slewing Bearing Roller

121.45.5000.990.41.1502, 5297.6, 4747, 203, 5201. 121.45.5300.990.41.1502, 5605.6, 5047, 203, 5602. 121.45.5600.990.41.1502, 5891.6, 5347, 203, 5764

121.45.5000.990.41.1502 Standard 5 Slewing Ring Bearings

Product Features