| No. | Brand | b | c | E | a | C | B | T | d |
| 162.40.2000.891.41.1503 | Standard 5 | - | - | - | - | - | 206 mm | - | - |
| 35 0411 01 | Rollix | - | - | - | - | - | 106 mm | - | 420 mm |
| 21 0541 01 | Rollix | - | - | - | - | - | 200 mm | - | - |
| 12.50.3839.001.49.1502 | Standard 5 | - | - | - | - | - | 38 mm | - | 110 mm |
| 161.45.2510.890.11.1503 | Standard 5 | - | - | - | - | - | 12 mm | - | 45 mm |
| 12.50.3520.001.49.1502 | Standard 5 | - | - | - | - | - | 39.7 mm | - | 45 mm |
| 37 0541 01 | Rollix | - | - | - | - | - | 52 mm | - | 100 mm |
| 7 0573 | Rollix | - | - | - | - | - | 9 mm | - | 30 mm |
| 191.40.4500.990.41.1502 | Standard 5 | - | - | - | - | - | - | - | 150 mm |
| 28 0411 01 | Rollix | - | - | - | - | - | 40 mm | - | 50 mm |
| 62.50.2000.001.49.1504 | Standard 5 | - | - | - | - | - | 5 mm | - | 12 mm |
| 162.45.2240.890.11.1503 | Standard 5 | mm | - | mm | - | - | 56 mm | - | - |
| 12.45.3400.101.49.1502 | Standard 5 | - | - | - | - | - | 76 mm | - | - |
| 23 0641 01 | Rollix | - | - | - | - | - | 17 mm | - | 35 mm |
| 161.50.2800.891.41.1503 | Standard 5 | - | - | - | - | - | - | - | 95 mm |
| 192.40.2800.990.41.1502 | Standard 5 | - | - | - | - | - | 31 mm | - | 70 mm |
| 92.50.2266.990.41.1502 | Standard 5 | - | - | - | - | - | - | - | 600 mm |
| 161.45.2654.891.41.1503 | Standard 5 | - | - | - | - | - | 36 mm | - | 85 mm |
| 12.35.1960.400.11.1503 | Standard 5 | - | - | - | - | - | 270 mm | - | 470 mm |
| 37 0411 01 | Rollix | - | - | - | - | - | 7 mm | - | 40 mm |
| 91.40.2003.990.11.1502 | Standard 5 | - | - | - | - | - | 132 mm | - | 190 mm |
| 162.36.1900.891.41.1503 | Standard 5 | - | - | - | - | - | 10 mm | - | 80 mm |
| 6 0475 22 | Rollix | - | - | - | - | - | 8 mm | - | 25 mm |
| 62.50.2490.001.49.1504 | Standard 5 | - | - | - | - | - | 20 mm | - | 100 mm |
| 192.50.6735.990.41.1502 | Standard 5 | - | - | - | - | - | - | - | - |
| 11.25.1800.001.41.1503 | Standard 5 | - | - | - | - | - | 46 mm | - | - |
| 192.40.4000.990.41.1502 | Standard 5 | - | - | - | - | - | 17 mm | - | 35 mm |
| 62.50.2800.001.49.1504 | Standard 5 | - | - | - | - | - | 272 mm | - | 420 mm |
| 192.32.3550.990.41.1502 Standard 5 Slewing Ring Bearings | Dynamic Load Rating:13,600 N; ra (max):1 mm; Fillet Radius/Chamfer:1 mm; Static Load Rating:6,550 N; Cy (max):3.3 mm; Limiting Speed - Grease:16,000 rpm; Factor fo:12.3; Groove Diameter:44.6 mm; Da (max):41 mm; D:47 mm; da (min):23 mm; r1:0.5 mm; Radial Clearance:0.011 to 0.025 mm; Configuration:Single Row; Bore Type:Cylindrical Bore; Enclosure:Open; a (max):2.5 mm; Limiting Speed - Oil:19,000 rpm; |
| 192.25.2500.990.41.1502 Standard 5 Slewing Ring Bearings | Fillet Radius/Chamfer:0.6 mm; Enclosure:Single Shield with S; Cy (max):2.9 mm; D:42 mm; Radial Clearance:0.013 to 0.028 mm; Dx (min):47 mm; B:12 mm; Snap Ring Width:1.1 mm; Limiting Speed - Grease:18,000 rpm; b (min):1.4 mm; Limiting Speed - Oil:21,000 rpm; a (max):2.1 mm; Da (max):38 mm; Bore Type:Cylindrical Bore; d:20 mm; Static Load Rating:5,000 N; da (min):24 mm; Configuration:Single Row; D1 (max):39.8 mm; |
| 1 0555 01 Rollix Slewing Ring Bearings | Limiting Speed - Oil:9,500 rpm; Radial Clearance:0.015 to 0.033 mm; Weight:0.430 kg; Dx:80 mm; Configuration:Double Row; Dynamic Load Rating:40,000 N; d:35 mm; Enclosure:Snap Ring Groove wit; B:27 mm; Bore Type:Cylindrical Bore; Limiting Speed - Grease:7,000 rpm; ra:1 mm; Fillet Radius/Chamfer:1.1 mm; Snap Ring Outside Diameter:78.6 mm; da:42 mm; D:72 mm; a (max):3.3 mm; Cy:4.7 mm; Snap Ring Width:1.7 mm; |
| 161.45.2510.890.11.1503 Standard 5 Slewing Ring Bearings | Dx (min):72 mm; Limiting Speed - Oil:12,000 rpm; Weight:0.124 kg; Limiting Speed - Grease:10,000 rpm; Cy (max):2.3 mm; Da (max):64 mm; Snap Ring Outside Diameter:70.8 mm; Radial Clearance:0.018 to 0.036 mm; r1:0.5 mm; Dynamic Load Rating:14,100 N; da (min):49 mm; ra (max):0.6 mm; Configuration:Single Row; a (max):1.7 mm; B:12 mm; D:68 mm; d:45 mm; Enclosure:Single Shield with S; Static Load Rating:10,900 N; |
| 161.40.2368.890.11.1503 Standard 5 Slewing Ring Bearings | Bore Type:Cylindrical Bore; ra (max):2 mm; Enclosure:Open; Dynamic Load Rating:120,000 N; Static Load Rating:140,000 N; Inside Ring Outside Diameter:101.8 mm; Configuration:Single Row; Fillet Radius/Chamfer:2 mm; D:150 mm; db (min):95 mm; ra1 (max):2 mm; dc (min):104 mm; Limiting Speed - Oil:5,000 rpm; Da (max):140 mm; Limiting Speed - Grease:4,300 rpm; d:85 mm; B:28 mm; dd (min):110 mm; Radial Clearance:0.050 to 0.085 mm; |
| 192.50.4500.990.41.1502 Standard 5 Slewing Ring Bearings | Dynamic (Ca):234 kN; D:150 mm; C:32.5 mm; B:39 mm; Static (Coa):400 kN; T:39 mm; r1s (min):1.5 mm; Pu:45.350 kN; d2:100 mm; rs (min):2 mm; r2s (min):0.6 mm; a:29 mm; |
| 12.50.3520.001.49.1502 Standard 5 Slewing Ring Bearings | Snap Ring Width:2.5 mm; Limiting Speed - Grease:5,000 rpm; Dynamic Load Rating:76,500 N; Fillet Radius/Chamfer:1.5 mm; ra:1.5 mm; Snap Ring Outside Diameter:106.5 mm; Cy:5.4 mm; da:54 mm; Dx:108 mm; Radial Clearance:0.018 to 0.036 mm; a (max):3.3 mm; Weight:1.420 kg; Limiting Speed - Oil:6,700 rpm; Da:91 mm; Static Load Rating:56,500 N; Configuration:Double Row; d:45 mm; D:100 mm; B:39.7 mm; Enclosure:Snap Ring Groove wit; |
| 11.40.2240.000.11.1502 Standard 5 Slewing Ring Bearings | Weight:5.370 kg; Configuration:Single Row; Static Load Rating:265,000 N; Limiting Speed - Oil:3,800 rpm; Da (max):176 mm; db (max):111 mm; B:43 mm; Fillet Radius/Chamfer:3 mm; Enclosure:Open; d:90 mm; db (min):104 mm; ra (max):2.5 mm; dd (min):127 mm; dc (min):117 mm; Radial Clearance:0.075 to 0.110 mm; Bore Type:Cylindrical Bore; r1:3 mm; ra1 (max):2.5 mm; Limiting Speed - Grease:3,200 rpm; Dynamic Load Rating:240,000 N; |
| 11.30.2031.600.11.1503 Standard 5 Slewing Ring Bearings | Roller Profile:Symmetric; da (min):30.5 mm; ra (max):1 mm; Constant e:0.35; Hole Diameter (do):3 mm; Configuration:Double Row; Fillet Radius/Chamfer:1 mm; Static Load Rating:48,000 N; Bore Type:Tapered Bore; Groove Width A:5 mm; Limiting Speed - Grease:11,600 rpm; Axial Load Factor Y2:2.85; Da (max):46.5 mm; Enclosure:Open; d:25 mm; Center Guidance:Floating Steel Ring; Axial Load Factor Y1:1.91; Weight:0.190 kg; |
| 162.50.3000.891.41.1503 Standard 5 Slewing Ring Bearings | Snap Ring Width:1.1 mm; D1 (max):92.9 mm; Dynamic Load Rating:12,500 N; Limiting Speed - Oil:7,600 rpm; ra (max):0.6 mm; b (min):1.3 mm; r1:0.5 mm; a (max):1.7 mm; d:75 mm; Factor fo:16.0; Radial Clearance:0.025 to 0.051 mm; Limiting Speed - Grease:6,500 rpm; D:95 mm; Dx (min):101 mm; Weight:0.150 kg; Snap Ring Outside Diameter:99.4 mm; Configuration:Single Row; da (min):79 mm; B:10 mm; Da (max):91 mm; |
| 21 0411 01 Rollix Slewing Ring Bearings | ra1 (max):4 mm; r1:5 mm; Enclosure:Open; B:82 mm; Da (max):498 mm; db (min):362 mm; Bore Type:Cylindrical Bore; Dynamic Load Rating:1,080,000 N; ra (max):4 mm; dc (min):390 mm; da (min):362 mm; Db (min):498 mm; Fillet Radius/Chamfer:5 mm; Limiting Speed - Grease:1,200 rpm; Static Load Rating:1,740,000 N; Limiting Speed - Oil:1,300 rpm; Db (max):476 mm; Outside Ring Inside Diameter:475 mm; db (max):381 mm; |
| 23 0411 01 Rollix Slewing Ring Bearings | ra (max):1 mm; Weight:1.060 kg; ra1 (max):1 mm; Radial Clearance:0.050 to 0.085 mm; Limiting Speed - Oil:6,000 rpm; B:22 mm; Static Load Rating:95,500 N; Da (max):123 mm; Limiting Speed - Grease:5,000 rpm; r1:1 mm; dc (min):99 mm; Configuration:Single Row; D:130 mm; d:85 mm; Fillet Radius/Chamfer:1.1 mm; db (max):95 mm; db (min):91 mm; Bore Type:Cylindrical Bore; Enclosure:Open; Dynamic Load Rating:74,500 N; |
| 191.32.3150.990.41.1502 Standard 5 Slewing Ring Bearings | Pu:3.650 kN; d2:20 mm; a:11 mm; rs (min):1.5 mm; Static (Coa):29.9 kN; T:16.25 mm; C:13 mm; Dynamic (Ca):30.4 kN; r2s (min):0.6 mm; r1s (min):1.5 mm; B:15 mm; D:52 mm; |
| 191.50.6735.990.41.1502 Standard 5 Slewing Ring Bearings | D:310 mm; d:170 mm; Enclosure:Open; Static Load Rating:224,000 N; Configuration:Single Row; Fillet Radius/Chamfer:4 mm; Radial Clearance:0.053 to 0.102 mm; Da (max):292 mm; Bore Type:Cylindrical Bore; Factor fo:15.3; Weight:17.500 kg; ra (max):3 mm; B:52 mm; Limiting Speed - Grease:2,000 rpm; Limiting Speed - Oil:2,400 rpm; da (min):188 mm; Dynamic Load Rating:212,000 N; |
| 92.35.1900.991.41.1502 Standard 5 Slewing Ring Bearings | Configuration:Single Row; Cy (max):5.3 mm; B:22 mm; Weight:0.863 kg; r1:0.5 mm; Radial Clearance:0.030 to 0.058 mm; ra (max):1 mm; D:130 mm; Snap Ring Width:2.8 mm; Dynamic Load Rating:49,500 N; Snap Ring Outside Diameter:139.7 mm; Factor fo:15.7; Dx (min):141.5 mm; Fillet Radius/Chamfer:1.1 mm; d:85 mm; Limiting Speed - Grease:5,000 rpm; Bore Type:Cylindrical Bore; a (max):2.9 mm; b (min):3.1 mm; |
| 121.40.5300.990.41.1502 Standard 5 Slewing Ring Bearings | D:280 mm; Radial Clearance:0.120 to 0.180 mm; Configuration:Double Row; Retainer Material:Machined Brass; Enclosure:Open; d:180 mm; Axial Load Factor Y1:2.47; Limiting Speed - Oil:2,800 rpm; Groove Width A:15 mm; Center Guidance:Fixed Inner Ring Rib; Axial Load Factor Y0:2.41; Nr. of Holes:6; Roller Profile:Asymmetric; Constant e:0.27; B:74 mm; Axial Load Factor Y2:3.67; Static Load Rating:1,280,000 N; |
3 0600 02 Rollix Slewing Ring Bearings Video
Section 16-3-600 - Assault and battery. :: 2012 South Carolina ...
2012 South Carolina Code of Laws Title 16 - Crimes and Offenses Chapter 3 - OFFENSES AGAINST THE PERSON Section 16-3-600 - Assault and battery.
DOD - UFC 3-600-02 - OPERATIONS AND MAINTENANCE
This UFC provides requirements for inspection, test, and maintenance (ITM) of engineered fire protection features in Department of Defense (DoD) facilities.
UFC 3-600-02 : OPERATIONS AND MAINTENANCE - IHS ...
PURPOSE AND SCOPE. This UFC provides requirements for inspection, test, and maintenance (ITM) of engineered fire protection features in Department of Defense ( ...
South Carolina Code of Laws Unannotated
If a person is convicted of an offense pursuant to Section 16-3-29, 16-3-600, or manslaughter, and the offense is committed with a deadly weapon of the ...
Assault First, Second, or Third Degree | Charleston SC
Assault & Battery, 2nd degree is codified in S.C. Code §16-3-600(D). A person commits the misdemeanor offense of assault and battery in the second degree if ...
UFC 3-601-02 Fire Protection Systems Inspection, Testing ...
This UFC provides requirements for inspection, testing, and maintenance (ITM) of active and passive fire protection and life safety features in DoD ...
TYLENOL REGULAR STRENGTH- acetaminophen tablet, film ...
More Info For This Drug · NDC Code(s): 50580-600-01, 50580-600-02, 50580-600-03 · Packager: Johnson & Johnson Consumer Inc., McNeil Consumer Healthcare Division.