| No. | Brand | b | c | E | a | C | B | T | d |
| 11.50.3167.001.49.1502 | Standard 5 | - | - | - | - | - | 6 mm | - | 10 mm |
| 12.50.3839.001.49.1502 | Standard 5 | - | - | - | - | - | 38 mm | - | 110 mm |
| 11.40.2240.001.41.1502 | Standard 5 | - | - | - | - | - | 15 mm | - | 25 mm |
| 8 0340 04 | Rollix | - | - | - | - | - | 12 mm | - | 17 mm |
| 191.32.2500.990.41.1502 | Standard 5 | - | - | - | - | - | 64 mm | - | 130 mm |
| 192.32.2500.990.41.1502 | Standard 5 | - | - | - | - | - | - | - | 15 mm |
| 91.35.1900.991.41.1502 | Standard 5 | - | - | - | - | - | 7 mm | - | 25 mm |
| 192.50.5600.990.41.1502 | Standard 5 | - | - | - | - | - | 19 mm | - | 45 mm |
| 27 0641 01 | Rollix | - | - | - | - | - | 44.4 mm | - | 80 mm |
| 11.40.2619.000.11.1502 | Standard 5 | - | - | - | - | - | 31 mm | - | 60 mm |
| 11.40.3150.000.11.1502 | Standard 5 | - | - | - | - | - | 256 mm | - | 400 mm |
| 39 0541 01 | Rollix | - | - | - | - | - | 52 mm | - | 170 mm |
| 121.36.4250.990.41.1502 | Standard 5 | - | - | - | - | - | 43 mm | - | 55 mm |
| 161.45.2240.890.11.1503 | Standard 5 | - | - | - | - | - | 13 mm | - | 85 mm |
| 11.30.2235.001.41.1503 | Standard 5 | - | - | - | - | 14.5 mm | 19 mm | - | 40 mm |
| 12.40.2199.301.41.1502 | Standard 5 | - | - | - | - | - | 258 mm | - | - |
| 61.40.1800.013.19.1503 | Standard 5 | - | - | - | - | - | 18 mm | - | 20 mm |
| 91.40.2395.991.41.1502 | Standard 5 | - | - | - | - | - | 64 mm | - | - |
| 161.50.2660.891.41.1503 | Standard 5 | - | - | - | - | - | 106 mm | - | 280 mm |
| 29 0411 01 | Rollix | - | - | - | - | - | 46 mm | - | 100 mm |
| 12.40.2950.000.11.1502 | Standard 5 | - | - | - | - | - | 78 mm | - | 190 mm |
| 12.45.3400.101.49.1502 | Standard 5 | - | - | - | - | - | 76 mm | - | - |
| 12.35.2500.000.11.1503 | Standard 5 | - | - | - | - | - | - | - | 80 mm |
| 192.50.6735.990.41.1502 | Standard 5 | - | - | - | - | - | - | - | - |
| 8 04 | Rollix | - | - | - | - | - | 16 mm | - | 50 mm |
| 6 0574 09 | Rollix | - | - | - | - | - | 35 mm | - | 70 mm |
| 2 0422 | Rollix | - | - | - | - | - | 22 mm | - | - |
| 161.50.2500.891.41.1503 Standard 5 Slewing Ring Bearings | Pu:592.580 kN; d2 (max):mm; D:1180 mm; Dynamic (Ca):4220 kN; s:17 mm; Static (Coa):9810 kN; d2:900 mm; b1:mm; F:982 mm; rs (min):8 mm; b:mm; r1s (min):8 mm; B:165 mm; E:mm; |
| 11.40.2915.001.41.1502 Standard 5 Slewing Ring Bearings | Configuration:Double Row; Bore Type:Cylindrical Bore; Limiting Speed - Grease:8,000 rpm; Enclosure:Open; Cy:3.3 mm; Fillet Radius/Chamfer:1 mm; Dx:58.8 mm; Limiting Speed - Oil:11,000 rpm; B:20.6 mm; ra:1 mm; Static Load Rating:14,300 N; da:31 mm46 mm; Dynamic Load Rating:20,600 N; Weight:0.190 kg; D:52 mm; d:25 mm; Radial Clearance:0.013 to 0.028 mm; |
| 91.30.1799.990.11.1502 Standard 5 Slewing Ring Bearings | Limiting Speed - Grease:3,000 rpm; Limiting Speed - Oil:3,600 rpm; Inside Ring Outside Diameter:121.5 mm; Dynamic Load Rating:259,000 N; dc (min):124 mm; db (max):119 mm; Static Load Rating:289,000 N; Enclosure:Open; B:45 mm; ra1 (max):2.5 mm; Configuration:Single Row; Bore Type:Cylindrical Bore; db (min):109 mm; d:95 mm; dd (min):134 mm; Fillet Radius/Chamfer:3 mm; Da (max):186 mm; ra (max):2.5 mm; |
| 91.40.2199.991.41.1502 Standard 5 Slewing Ring Bearings | Radial Clearance:0.008 to 0.028 mm; da (min):69 mm; Enclosure:Single Shield with S; Dynamic Load Rating:11,900 N; Fillet Radius/Chamfer:0.6 mm; Snap Ring Outside Diameter:89.4 mm; Limiting Speed - Grease:7,500 rpm; D1 (max):82.9 mm; Cy (max):2.5 mm; Factor fo:16.2; Bore Type:Cylindrical Bore; d:65 mm; Dx (min):91 mm; ra (max):0.6 mm; r1:0.5 mm; Snap Ring Width:1.1 mm; Limiting Speed - Oil:8,700 rpm; |
| 92.35.1900.990.11.1502 Standard 5 Slewing Ring Bearings | da (min):64 mm; Da (max):91 mm; Static Load Rating:29,300 N; Weight:0.607 kg; ra (max):1.5 mm; Fillet Radius/Chamfer:1.5 mm; Configuration:Single Row; D:100 mm; Dynamic Load Rating:43,500 N; d:55 mm; Bore Type:Cylindrical Bore; Limiting Speed - Grease:4,300 rpm; Factor fo:14.4; B:21 mm; Radial Clearance:0.023 to 0.043 mm; Enclosure:Double Seal; |
| 92.40.2395.991.41.1502 Standard 5 Slewing Ring Bearings | Dynamic Load Rating:170,000 N; Static Load Rating:127,000 N; Axial Load Factor Y0:2.19; Axial Load Factor Y2:3.34; Da (max):101 mm; Axial Load Factor Y1:2.24; d:50 mm; D:110 mm; Bore Type:Tapered Bore; Groove Width A:5 mm; Limiting Speed - Oil:8,250 rpm; Weight:1.360 kg; Limiting Speed - Grease:6,000 rpm; Nr. of Holes:4; Enclosure:Open; Configuration:Double Row; Radial Clearance:0.045 to 0.060 mm; |
| 61.50.1900.001.49.1504 Standard 5 Slewing Ring Bearings | Da (max):186 mm; r1:3 mm; Limiting Speed - Grease:3,000 rpm; db (max):119 mm; Limiting Speed - Oil:3,600 rpm; ra1 (max):2.5 mm; Fillet Radius/Chamfer:3 mm; ra (max):2.5 mm; Inside Ring Outside Diameter:121.5 mm; Radial Clearance:0.050 to 0.085 mm; d:95 mm; Enclosure:Open; B:45 mm; Dynamic Load Rating:259,000 N; db (min):109 mm; dd (min):134 mm; Configuration:Single Row; D:200 mm; dc (min):124 mm; Static Load Rating:289,000 N; |
| 162.50.2800.891.41.1503 Standard 5 Slewing Ring Bearings | Axial Load Factor Y0:2.45; Bore Type:Tapered Bore; Limiting Speed - Oil:1,000 rpm; Configuration:Double Row; ra (max):4 mm; Weight:179.000 kg; Hole Diameter (do):12 mm; Groove Width A:26 mm; Dynamic Load Rating:4,250,000 N; Center Guidance:Fixed Inner Ring Rib; Static Load Rating:4,900,000 N; B:150 mm; Limiting Speed - Grease:820 rpm; Enclosure:Open; D:580 mm; Da (max):558 mm; Axial Load Factor Y1:2.51; |
| 162.40.2128.890.11.1503 Standard 5 Slewing Ring Bearings | Grease:0.210 kN; Static (Cor):15.760 kN; B:20 mm; with cylindrical bore:13 000 min-1; d:30 mm; B1:mm; Oil:11 000 min-1; rs Dynamic (Cr):1 mm; with tapered bore:2206 ; D:62 mm; Pu:4.550 kN; |
| 11.50.4140.001.49.1502 Standard 5 Slewing Ring Bearings | Limiting Speed - Grease:6,000 rpm; d:40 mm; Fillet Radius/Chamfer:2 mm; Enclosure:Open; Outside Ring Inside Diameter:92 mm; r1:2 mm; Db (max):93 mm; db (min):50 mm; db (max):57 mm; Configuration:Single Row; B:27 mm; Da (max):100 mm; ra (max):2 mm; Static Load Rating:89,000 N; da (min):50 mm; Dynamic Load Rating:95,500 N; Radial Clearance:0.025 to 0.050 mm; ra1 (max):2 mm; Bore Type:Cylindrical Bore; |
| 1 0181 02 Rollix Slewing Ring Bearings | db (max):31 mm; Radial Clearance:0.020 to 0.045 mm; Outside Ring Inside Diameter:45 mm; dc (min):34 mm; Limiting Speed - Grease:13,000 rpm; Limiting Speed - Oil:16,000 rpm; Db (max):47 mm; db (min):30 mm; D:52 mm; Configuration:Single Row; Static Load Rating:15,700 N; d:25 mm; da (min):31 mm; Enclosure:Open; ra (max):1 mm; ra1 (max):0.6 mm; B:15 mm; Db (min):47 mm; Dynamic Load Rating:17,700 N; Fillet Radius/Chamfer:1 mm; |
| 11.30.2235.000.11.1503 Standard 5 Slewing Ring Bearings | Limiting Speed - Grease:10,000 rpm; Groove Width:1 mm; Radial Clearance:0.018 to 0.036 mm; Configuration:Single Row; Dynamic Load Rating:6,400 N; Da (max):63 mm; d:50 mm; ra (max):0.3 mm; Fillet Radius/Chamfer:0.3 mm; Dx (min):68.5 mm; r1:0.3 mm; da (min):52 mm; Groove Diameter:63.7 mm; Weight:0.054 kg; B:7 mm; Enclosure:Open; Static Load Rating:5,800 N; Factor fo:16.1; D:65 mm; Bore Type:Cylindrical Bore; |
| 12.35.2500.001.41.1503 Standard 5 Slewing Ring Bearings | Fillet Radius/Chamfer:5 mm; B:82 mm; Radial Clearance:0.280 to 0.370 mm; Configuration:Single Row; Weight:72.300 kg; Limiting Speed - Grease:1,000 rpm; Dynamic Load Rating:1,140,000 N; Limiting Speed - Oil:1,200 rpm; Static Load Rating:1,910,000 N; Da (max):538 mm; ra1 (max):4 mm; db (min):402 mm; d:380 mm; r1:5 mm; ra (max):4 mm; Enclosure:Open; D:560 mm; db (max):421 mm; dc (min):430 mm; Bore Type:Cylindrical Bore; |
| 91.40.2199.990.11.1502 Standard 5 Slewing Ring Bearings | Oil:135.410 kN; rs (min):2.1 mm; Static (Cor):8.3 mm; D:225 mm; with cylindrical bore:850 min-1; Grease:1330 kN; B:85 mm; Pu:740 kN; Dynamic (Cr):4.5 mm; with tapered bore:1 100 min-1; d:140 mm; |
| 36 0541 01 Rollix Slewing Ring Bearings | Weight:0.128 kg; Groove Width:1.4 mm; Factor fo:13.9; Radial Clearance:0.013 to 0.028 mm; Dynamic Load Rating:14,000 N; Dx (min):58.5 mm; da (min):31 mm; Fillet Radius/Chamfer:1 mm; D:52 mm; Groove Diameter:49.7 mm; Configuration:Single Row; Static Load Rating:7,900 N; Da (max):46 mm; Limiting Speed - Oil:16,000 rpm; Cy (max):3.3 mm; ra (max):1 mm; d:25 mm; Limiting Speed - Grease:13,000 rpm; Enclosure:Open; |
| 11.25.1800.000.11.1503 Standard 5 Slewing Ring Bearings | Weight:208.000 kg; d:460 mm; Enclosure:Open; Retainer Material:Machined Brass; Constant e:0.23; Da (max):652 mm; da (min):488 mm; Dynamic Load Rating:4,700,000 N; Limiting Speed - Grease:600 rpm; Static Load Rating:6,850,000 N; Hole Diameter (do):15 mm; ra (max):5 mm; D:680 mm; Groove Width A:32 mm; B:163 mm; Nr. of Holes:8; Fillet Radius/Chamfer:6 mm; Limiting Speed - Oil:750 rpm; Center Guidance:Fixed Inner Ring Rib; |
7 0673 Rollix Slewing Ring Bearings Video
Clinical analysis of Kimura's disease in 24 cases from China
by G Zhang · 2020 · Cited by 14 — Lesion diameter ranged from 0.6 cm to 7 cm with unilateral involvement ... BMC Surg 20, 1 (2020). https://doi.org/10.1186/s12893-019-0673-7.
1955 Bowman 13 Clyde Vollmer PSA 7 (0673) | eBay
Find many great new & used options and get the best deals for 1955 Bowman 13 Clyde Vollmer PSA 7 (0673) at the best online prices at eBay!
Microwave-to-optics conversion using a mechanical oscillator ...
by M Forsch · 2020 · Cited by 159 — Conversion between signals in the microwave and optical domains is of great interest both for classical telecommunication and for connecting ...
The 10 Best Places near Haugerudsentret 1-7, 0673 Oslo, Norway ...
Browsing all of Haugerudsentret 1-7, 0673 Oslo, Norway - Tim Wendelboe, Himkok, Illegal Burger, Døgnvill Burger Vulkan, Habsak, Lille Saigon 1, ...
Auto 7 301-0673 A/C Drive Belt
The Auto 7 A/C drive belt is the perfect OE replacement if you need a new A/C drive belt. Auto 7 is a supplier of original equipment quality parts for ...
Margin Trimmer #105/106 hdl #7 orange, mesial, 1mm - Hu ...
Cod MT105/0673. Margin Trimmer used to produce proper bevel on enamel margins. Similar to a hatchet except the blade is curved and the cutting edge angled.
DJO 11-0673-7 - McKesson Medical-Surgical
Knee Brace DonJoy® Economy Left or Right Knee Hook and Loop Strap Closure 29-1/2 to 32 Inch Thigh Circumference / 21 to 23 Inch Mid-Patella Circumference ...Features: Indications: mild MCL and/or LCL sp...Manufacturer #: 11-0673-7Length: Aluminum / Drytex® / Nylon / PlasticFastening Type: Hook and Loop Strap Closure